home *** CD-ROM | disk | FTP | other *** search
/ Gold Medal Software 3 / Gold Medal Software - Volume 3 (Gold Medal) (1994).iso / utils2 / rfm301.arj / RFM.HLP < prev    next >
Text File  |  1994-02-09  |  8KB  |  134 lines

  1. The left mouse button is used to change to directories, execute COM, EXE, BAT or BTM files, and
  2. unarchive archive files (ARJ, ZIP, LZH etc).
  3. The middle mouse button (or both left and right or holding down CTRL or SHIFT and then pressing
  4. any button) is used to mark files and directories. See below for operations on marked files.
  5. The right mouse button is used to execute the program that is associated with the extension of the
  6. file. You can associate an extension with a program from under the 'Configure RFM'-button.
  7.  
  8. Holding down the ALT-key while pressing the left button on an executable file or on a line in the
  9. 'Util'-window causes RFM to wait for a button press before re-entering RFM.
  10.  
  11. KEYBOARD :                                  Click on the Volume label to if you want to enter a
  12.                                             new label or remove the current label.
  13. HOME : Go to begin of directory list         Click on the Date if you want to change the date.
  14. END  : Go to end of directory list           Click on the Time if you want to change the time.
  15. PGUP : Go one page up if possible
  16. PGDN : Go one page down if possible         The Buttons on the left side of the screen :
  17. ESC  : if window open then close window
  18.        else Quit RFM                        Quit  : Quits RFM without asking confirmation
  19. A : Toggle marked-status of All files        Tree  : Shows directory-tree and lets you change dir
  20.     and directories in this directory        Mdir  : Lets you create a new directory
  21. D : Opens the 'Disp'-window                  Copy  : Lets you copy marked files/dirs to elsewhere
  22. E : Opens the 'Execute'-Window               Move  : Lets you move marked files/dirs to elsewhere
  23. F : Opens the 'Find'-window.                 Del   : Lets you delete marked files AND directories
  24.     When you are in dir_only-mode, pres-    Ren   : Lets you rename marked files AND directories
  25.     sing F shows you the Full directory      Util  : A VERY handy feature, only for registd. users
  26. M : Opens the 'Mdir'-window, except when     Attr  : Lets you change attributes of marked files
  27.     you clicked the left button on an        Disp  : Handles Display matters
  28.     archive file. Then pressing M creates    Arch  : Creates archive file containing marked files
  29.     a directory with the same name as the    Exec  : Lets you enter a command to be executed
  30.     archive, and changes to that directory   Mark  : Some options for marking files
  31. N : Clear all marks (Mark (N)one)            Count : Counts bytes used of up to 34 marked DIRS
  32. S : Opens the 'Sort'-window                  Unarc : Unarchives all marked archives to destination
  33. T : Show the directory Tree                  Fill  : Fills A: or B: to the max with marked files
  34. U : Opens the 'Utilities'-Window              Find  : Finds a file and copies it to current dir
  35. W : Write all marked files to 'MARKED.RFM'    Sort  : Lets you change the sorting order
  36. X : Displays eXecutables in current dir
  37. 1 : Shows the directory as 1 column         The buttons that work with marked files only operate
  38. 2 : Shows the directory as 2 columns        when there ARE marked files. Most of the buttons
  39. \ : Go to the root of the current drive      provide help by pressing F1 after clicking on them.
  40. ■Tree
  41. Here the directory structure is shown as a tree. You can change to a directory
  42. by clicking on the directory name. Clicking on 'Cancel' or pressing ESC aborts
  43. the 'Tree'-operation. When you create or rename or delete a directory inside RFM,
  44. RFM updates the 'Tree'-information. If you create, rename, or delete a directory
  45. from DOS however, or if you run a program that creates a directory, RFM's 'Tree'-
  46. information is not correct anymore. The 'ReRead Tree'-button therefore re-scans
  47. your drive so that this information is correct again.
  48. ■Copy
  49. You are now in 'dir_only'-mode which means that only
  50. directories are shown. You can move to the drive and
  51. directory that you want as destination for the Copy/
  52. Move operation.
  53. You can press 'F' to view the Full current directory.
  54. This is handy if you want to know whether a certain
  55. file is in the current directory.
  56. You can press ESC or click on 'Quit' to abort the
  57. Copy/Move operation.
  58. Once you have selected the destination drive and
  59. directory, clicking on the 'Go'-button results in
  60. copying/moving all marked files to the destination.
  61. ■Attr
  62. This option allows you to change the
  63. attributes of all marked files.
  64. If you click on an attribute the word
  65. behind it will change from 'ignore'
  66. to 'on' to 'off' to 'ignore'.
  67. 'ignore' leaves the attribute as is,
  68. 'on' turns it on, 'off' turns it off.
  69. Click on 'Ok' to set the attributes.
  70. ■Disp
  71. 'File Mask' opens a window where you can enter a mask for files to be displayed.
  72. You can use wildcards '?' and '*' here.
  73. 'Executables' shows all executable files (i.e. files with extension COM, EXE or BAT.
  74. If 4DOS is your command processor, files with extension BTM will be shown as well).
  75. The SETTINGS-part of the window shows the settings as they are currently present.
  76. Clicking on a setting toggles this setting.
  77. ■Zip Arch
  78. Click on the extension of the archiver that you
  79. want to use. A window will pop up asking you for
  80. the name of the archive to be created. You need
  81. not specify the extension. You can also enter an
  82. entire pathname, e.g C:\ARCHDIR\RFM.ARJ.
  83. ■Mark
  84. 'All' toggles the marked-status of all files and directories, so
  85. marked files will be unmarked, unmarked files will be marked.
  86. Pressing key 'A' has the same effect as clicking on this option.
  87. 'None' unmarkes all files and directories. Pressing key 'N' has the
  88. same effect as clicking on this option.
  89. 'User specified' opens a window in which you can type a file mask
  90. for the files you want to mark. Wildcards '?' and '*' are allowed.
  91. 'Write Marks to File' writes the names of all files and directories
  92. to the file 'MARKED.RFM' in the current directory. Pressing key 'W'
  93. has the same effect as clicking on this option.
  94. ■Unarc
  95. You are now in 'dir_only'-mode which means that only direc-
  96. tories are shown. You can move to the drive and directory
  97. that you want as destination for the Unarchive operation.
  98. You can press 'F' to view the Full current directory. This
  99. is handy if you want to know whether a certain file is in
  100. the current directory. You can press ESC or click on 'Quit'
  101. to abort the Unarchive operation.
  102. Once you have selected the destination drive and directory,
  103. clicking on the 'Go'-button results in extracting the archive
  104. file(s) to the destination.
  105. Pressing 'M' results in creating-and immediately changing to-
  106. a directory with the same name as the archive file (without
  107. extension). This is a fast way to extract to a new directory.
  108. changin
  109. ■Fill
  110. Fill copies all marked files to drive A: or B:, hereby
  111. leaving as little free space on those disks as possible.
  112. It, so to say, fills your disks to the max. If you check
  113. the option 'Keep Marks after Fill' then all marked files
  114. will remain marked after the 'Fill'-operation. You can
  115. then perform another operation on these files (e.g. delete
  116. them if you wanted these files moved instead of copied).
  117. The disks in A: or B: need not be empty, RFM checks their
  118. free space. Existing files will be asked to overwrite.
  119. ■Get
  120. Find finds a file across all your drives and optionally copies
  121. it to the current directory. Default all drives, except A: and
  122. B:, are searched. You can specify which drives to search by
  123. typing them in the window.  For instance, typing 'ace rfm.com'
  124. searches for file RFM.COM on drives A:, C:, and E:.
  125. NOTE : Do not type spaces between the drive letters.
  126. Wildcards in the filename are allowed.
  127. When a file is found you can :
  128. 'Get it', i.e. copy it to the current directory,
  129. 'Get All', i.e. copy all files that match the specification,
  130. 'Find Next' file,
  131. 'Go To' the directory the file is in,
  132. or 'Quit' the Find-operation.
  133. ===>The current directory is not included in the search<===
  134.